Options
用於牙齒再生之人源幹細胞在仿生矽酸鈣增強明膠甲基丙烯酸酯生物墨水誘導下的雙向分化
Date Issued
2024
Author(s)
林奕廷
LIN, YI-TING
Advisor
Huang, Tsui-Hsien
Abstract
隨著現代牙科再生醫學的發展,尋找能夠有效促進牙髓再生的材料成為研究的重點。傳統的牙髓治療方法雖然能夠緩解疼痛和感染,但無法完全恢復牙齒的結構和功能。因此,開發新型生物材料以促進牙髓再生具有重要意義。光固化矽酸鈣(CS)-聚乙二醇二丙烯酸酯(PEGDA)生物複合材料因其優異的生物相容性和機械性能而受到廣泛關注。矽酸鈣鹽具有良好的生物活性,能夠釋放鈣離子,促進細胞增殖和分化;而PEGDA則提供了良好的可加工性和力學強度。兩者結合形成的複合材料既能提供結構支撐,又能促進細胞的附著和增殖本研究旨在探討新型光固化鈣矽酸鹽(CS)-聚乙二醇二丙烯酸酯(PEGDA)生物複合材料對人類牙髓幹細胞(hDPSCs)在牙源性再生中的調節作用。研究結果表明,加入CS可增加PEGDA中的共價鍵數量,並且CS含量在30%時對hDPSC的粘附和增殖效果較佳。除此之外CS成功與PEGDA形成共價鍵,特別是30% 光固化量的CS具有展示出優異的機械性能。在體外實驗中,CS30複合材料顯示出穩定釋放鈣和矽離子的能力,增強了生物活性。CS30複合材料對hDPSCs的粘附、增生和分化均有顯著促進作用,特別是在牙源性標誌物如ALP、DSPP和DMP-1的表達上。該生物複合材料具有潛力促進牙髓再生相關領域的發展。除此之外本研究也用仿生鈣矽酸鹽強化明膠甲基丙烯酸酯(GelMa)生物墨水來誘導人類幹細胞的雙向分化,成功促進牙源性再生。研究結果顯示,含鈣矽酸鹽的支架顯著促進了牙源性標誌的表現,並增強了鈣沉積。我們開發了不同濃度的CS與GelMa結合的支架,這些支架在紫外線照射下交聯,證明了CS成功地與GelMa通過共價鍵結合。這些支架能釋放矽離子,並通過兩種不同的信號傳遞途徑來促進細胞生長和分化:一是利用GelMa的3D培養環境改善p38/MAPK的表現,促進細胞生長;二是通過CS刺激ERK/MAPK的活化,且濃度呈正相關。綜合以上,本研究成功找出以光固化方式讓牙源性再生的可行性,期望為牙髓再生治療提供新的思路和方法。
With the advancement of modern dental regenerative medicine, identifying materials that can effectively promote pulp regeneration has become a focal point of research. Traditional pulp treatment methods, although capable of alleviating pain and infection, cannot fully restore the structure and function of the tooth. Therefore, the development of the photocurable calcium silicate (CS)-polyethylene glycol diacrylate (PEGDA) biocomposites have garnered widespread attention due to their excellent biocompatibility and mechanical properties. The combination of these materials forms a composite that not only offers structural support but also promotes cell adhesion and proliferation. The results indicate that the incorporation of CS increases the number of covalent bonds in PEGDA, and the optimal adhesion and proliferation effects on hDPSCs are observed when the CS content is at 30%. In vitro experiments demonstrate that the CS30 composite material shows a stable release of calcium and silicon ions, enhancing bioactivity. This biocomposite material holds potential for advancing the field of pulp regeneration. Additionally, this study also employs biomimetic calcium silicate-reinforced gelatin methacrylate (GelMa) bioink to induce bidirectional differentiation of human stem cells, successfully promoting odontogenic regeneration. The results show that scaffolds containing calcium silicate significantly enhance the expression of odontogenic markers and increase calcium deposition. We developed scaffolds combining different concentrations of CS with GelMa, which were crosslinked under UV irradiation, demonstrating successful covalent bonding between CS and GelMa. These scaffolds can release silicon ions and promote cell growth and differentiation through two distinct signaling pathways: one by improving p38/MAPK expression via the 3D culture environment provided by GelMa, and the other by activating ERK/MAPK through CS stimulation in a concentration-dependent manner. In conclusion, this study successfully identifies the feasibility of using photocurable methods for odontogenic regeneration, aiming to provide new insights and approaches for pulp regeneration therapy.
Subjects
矽酸鈣
光固化
牙髓幹細胞
牙源性增生
生物列印
calcium silicate
light curing
dental pulp stem cells
bioprinting
Type
thesis
File(s)
No Thumbnail Available
Name
112CSMU0089012-005.pdf
Size
9.16 MB
Format
Adobe PDF
Checksum
(MD5):8d7dea3248d35cec61d68933d38828ad