Scalable and Blue Photoluminescence Emissions of (C4 H9 NH3)2 PbBr4 2D Perovskite Fabricated by the Dip-Coating Method Using a Co-Solvent System

The improved efficiency of perovskite-related photovoltaic devices, such as light-emitting diodes (LEDs), is related to film uniformity, the compactness of each layer, and thickness. Herein, we improved the traditional single-solvent, solution-processed method and developed a co-solvent method to prepare a two-dimensional (2D) (C4 H9 NH3)2 PbBr4 perovskite film for blue photolumines-cence (PL) emissions. A poor film-forming uniformity was observed for the use of the single-solvent, dimethylformamide (DMF) method. In adding 1,2-dichlorobenzene (ODCB) of a smaller polarity to DMF, the co-solvent engineering dramatically changed the film-forming properties. Optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffractometer (XRD), and time-resolved PL (TR-PL) spectroscopy analyses confirmed that the perovskite film prepared by the co-solvent system had a good crystallinity, fewer defects, and a longer carrier lifetime. These experimental results show a simple, scalable (1.23 × 1.23 cm2), and stable reproducibility method for preparing 2D perovskite of 415 nm wavelength PL emissions that might be beneficial for the development of ultraviolet (UV) photodetectors, blue LEDs, and high-resolution displays.