Repository logo
  • English
  • 中文
  • Log In
    New user? Click here to register.Have you forgotten your password?
Repository logo
    Communities & Collections
    Research Outputs
    Fundings & Projects
    People
    Organizations
    Statistics
  • English
  • 中文
  • Log In
    New user? Click here to register.Have you forgotten your password?
  1. Home
  2. Chung Shan Medical University
  3. Pure學術人才庫轉入
  4. Effect of preoxidation of titanium on the titanium-ceramic bonding
 
  • Details
Options

Effect of preoxidation of titanium on the titanium-ceramic bonding

Journal
Surface and Coatings Technology
Date Issued
2007-11-25
Author(s)
TSUI-HSIEN HUANG
SHINN-JYH DING  
DOI
10.1016/j.surfcoat.2007.05.056
URI
https://www.scopus.com/pages/publications/35348867993
https://scholars.csmu.edu.tw/handle/123456789/24663
Abstract
To improve the titanium-ceramic bonding is a challenged theme because the bonding plays an important role in long-term performance of dental prosthetic implants. This study focused on the pre-heat treatment effect on the surface characteristics of titanium and the bond strength of the porcelain-titanium system. Phase, morphology, and oxide layer thickness of the pre-heat-treated titanium were evaluated. In particular, the bond strength of porcelain fused to pre-treated titanium was measured by using three-point bending test. Statistical analyses were made using one-way analysis of variance (ANOVA). The results revealed that with an increase in treatment temperature, the intensity of diffraction peaks of rutile-type titania formed on pre-treated titanium surface increased. With regard to the thickness of the oxide layer, a monotonous change with increasing treatment temperature was observed. The bond strength of the porcelain-titanium system was 27.6 MPa for untreated titanium, which is above the minimum value of 25 MPa specified in ISO 9693 standard for the three-point bending test. When titanium subjected to pre-heat-treatment at 600-850 °C, the values became the range of 23.7-34.5 MPa, indicating significant differences (p < 0.05). The highest value resided in the optimal pre-treatment temperature of 750 °C at which specimens also presented greater amounts of remained porcelains on the titanium side among all tested groups after bending test. On the basis of the data, the pre-heat treatment in air for titanium substrates might be a simple and effective method for strengthening the titanium-ceramic bonding.
Type
journal article
Make it your own

DSpace-CRIS can be extensively configured to meet your needs. Decide which information need to be collected and available with fine-grained security. Start updating the theme to match your Institution's web identity.

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science

  • Cookie settings
  • Privacy policy
  • End User Agreement
  • Send Feedback