Repository logo
  • English
  • 中文
  • Log In
    New user? Click here to register.Have you forgotten your password?
Repository logo
    Communities & Collections
    Research Outputs
    Fundings & Projects
    People
    Organizations
    Statistics
  • English
  • 中文
  • Log In
    New user? Click here to register.Have you forgotten your password?
  1. Home
  2. College of Health Care and Management/健康管理學院
  3. School of Occupational Safety and Health/職業安全衛生學系
  4. 低危害性Cu/(Al2O3)p金屬基複合材料接合製程之研究
 
  • Details
Options

低危害性Cu/(Al2O3)p金屬基複合材料接合製程之研究

Date Issued
2020
Author(s)
林展慶
Chan-Ching Lin
Advisor
莊正利
Cheng-Li Chuang  
URI
https://handle.ncl.edu.tw/11296/e2n265
https://scholars.csmu.edu.tw/handle/123456789/20511
Abstract
金屬基複合材料現今已廣泛的應用於電子、汽車、航太與軍事工業等各項領域中。但金屬材料與陶瓷顆粒強化材間之潤濕性較差,易出現強化材於金屬基材中分佈不均與兩者界面接合性不佳等因素,容易造成金屬基複合材料產生強化材團聚與孔隙等缺陷,造成金屬基複合材料性質之衰退。金屬基複合材料之接合製程多以熔融銲接為主要方式,其接合製程須將接合區域升溫至金屬基材熔點以上而呈熔融狀態,過程中常伴隨著高溫、有毒氣體、金屬燻煙與強光等危害性因子,於短期的暴露可能造成灼傷、電光性眼炎與金屬燻煙熱等症狀,長期的暴露更可能導致白內障、皮膚癌、肺部損傷與神經系統病變等疾病。基於保障操作人員安全與金屬基複合材料接合之品質要求,以低危害熱壓製程技術進行金屬基複合材料之接合,並以無電鍍技術於氧化鋁表面鍍著銅膜,改善氧化鋁與銅金屬基材之接合性,評估取代高危害電弧熔融銲接製程之可行性。採用Cu/(Al2O3)P作為接合母材,分別以Cu/(Al2O3)P與強化材經無電鍍後(Cu/(E3-Al2O3)P)為接合層填料,以熱壓法進行Cu/(Al2O3)P複合材料之接合,進行剪力試驗與微結構觀察,綜整實驗結果評估低危害熱壓製程接合Cu/(Al2O3)P複合材料之可行性。實驗結果顯示Cu/(Al2O3)P複合材料之接合強度隨接合負荷、溫度與時間增加而提高,但過高之接合負荷(440 MPa)與持溫時間(50min),氧化鋁強化材承受較高之負荷與長時間受力而破裂,導致接合強度下降,以接合負荷330 MPa,加熱溫度550 ℃並持溫30分鐘熱壓製程參數接合Cu/(Al2O3)P複合材料具較佳之剪切強度,顯示適當提升之接合參數有助於提升Cu/(Al2O3)P之接合性質。透過強化材經無電鍍處理後,可增加氧化鋁與銅金屬基材間之潤濕性,提升氧化鋁強化材與銅基材間界面之接合品質進而提升Cu/(Al2O3)P之接合性能。結合無電鍍處理與熱壓製程,Cu/(Al2O3)P複合材料可得理想之接合品質,用以取代傳統高危害電弧熔融銲接合製程具高度潛力。
Metal matrix composites (MMCs) have been widely used in electronics, automobile, aerospace, military. The wetting between metallic matrix and particle reinforcement is poor resulting a weak joining strength between metallic matrix and particle reinforcement. Several defects would be existed in MMCs such as agglomeration and voids, which degraded the joining performance of MMCs. The arc fusion welding is currently major joining process for the MMCs. Hazards of high temperature, gas toxic, metal fume, and glare would be existed in arc fusion welding. Short-term exposure to hazards may cause burns, ophthalmic and metal fume fever, and long-term exposure to hazards may lead to cataracts, cutaneous carcinoma, lung disease and neuropathy. Based on the requirements for ensuring the safety of welders and the joining quality, MMCs was used to join with a low hazardous hot-pressing. A copper film depositing on alumina reinforcement using electroless-plating is expected to improve the joining strength between the copper and alumina. This experimental result can be used to evaluate the feasibility of the hot-pressing replacing the high hazardous arc fusion process. Cu/(Al2O3)p MMCs are selected as the parent metals, and the mixture of copper and alumina is used as filler. A low hazardous joining process of hot-pressing was used to join the Cu/(Al2O3)p MMCs, and the shear test and microstructure observation are conducted to examine the joining performance and the experimental result is to evaluate the feasibility of low-hazard hot-pressing joining process applied to the joining of Cu/(Al2O3)P MMCs. The experimental results show that the joining strength of Cu/(Al2O3)p MMCs increases with increasing the joining load, joining temperature and joining durations. The Cu/(Al2O3)P MMCs well joined using the hot-pressing with an adequate joining performance of 330 MPa in joining load, 550 ℃ in joining temperature and 30 minutes in joining duration. The joining strength decreased when the joining load and joining durations increased to 440 MPa and 30 min, the cracks can be found on the Al2O3 reinforcements due to elevated joining load and joining durations. Electroless-plating can promote the wetting and interfacial strength between copper and alumina reinforcement. An excellent bonding strength of Cu/(Al2O3)P MMCs is thus obtained using the combinations of hot-pressing joining process and using electroless-plating. This joining process has a great potential to replace the high hazardous arc fusion welding processes.
Subjects
低危害性熱壓製程
Cu/( Al2O3)p金屬基複合材料
無電鍍銅
Low hazardous hot-pressing
Cu/( Al2O3)p MMCS
Electroless-plating
Type
thesis
File(s)
No Thumbnail Available
Name

108CSMU5590013-001.zip

Size

7.46 MB

Format

Unknown

Checksum

(MD5):dc97cb16293cc980f3480f15977dd2aa

Make it your own

DSpace-CRIS can be extensively configured to meet your needs. Decide which information need to be collected and available with fine-grained security. Start updating the theme to match your Institution's web identity.

Built with DSpace-CRIS software - Extension maintained and optimized by 4Science

  • Cookie settings
  • Privacy policy
  • End User Agreement
  • Send Feedback