Options
Thin film-resistive gas sensor with SnO2/Au nanocomposite for hydrogen sulfide detection
Date Issued
2011-01-01
Author(s)
Abstract
A highly sensitive and selective H2S gas sensor has been developed by deposited a SnO2 thin film on an alumina substrate with a spin-coated method. This SnO2 sensing film was be made by a sol-gel method, and for getting a good sensitivity and selectivity we doping a mixture composite by Au nanoparticles with SnO2. In charactering of this sensing film, we used X-ray diffraction to analyze the composition of SnO 2/Au nanocomposites, and used the SEM and TEM images for observing the morphology and the particle size, the data shown the calcined temperature which set at 400 °C was the best calcinations temperature. The results of experiments showed that for hydrogen sulfide detection, there have a good linear response in SnO2+1Au composites, the detection range was from 0.2 ppm to 0.5 ppm at room temperature, and the selectivity the sensor shown that in Au doping composites have a good selectivity to H2S against SO 2, NH3 CO2 O2 and alcohol. The sensor had speedy response kinetics to H2S, the 90% response time to 0.2 ppm H2S was 60 s, and the recovery time was 30 s. We also studied the effect of humidity (50%, 70% and 80% RH) to H2S detection. The result showed the influence of humidity that was needed to be concerned in practical use.
Type
journal article