MU-JUNG CHAOCHIUNG-WEN HU2026-10-162026-10-162014-11-15Pure ID: 14960794Pure UUID: eb631387-565b-4ba1-afc9-55e83435ff6e10.1016/j.bios.2014.05.058https://www.scopus.com/pages/publications/84902248502https://scholars.csmu.edu.tw/handle/123456789/23006The amphoteric drug molecule tetracycline, which contains groups with pKa 3.4-9.9, was used as a template for conjugating molecularly imprinted polymers (MIPs) and as a quencher for CdTe quantum dot (QD) fluorescence. Two MIP-QD composites were synthesized by a sol-gel method using a silicon-based monomer and a monomer linker between the MIP and QD, i.e., tetraethoxylsilane/3-mercaptopropyltriethoxysilane (MPS) and tetraethoxylsilane/3-aminopropyltriethoxysilane (APS). Another MIP-QD composite was synthesized by the chain-growth polymerization of methacrylic acid (MAA) and an allyl mercaptan linker. The prepared MIP-QDs were characterized by FTIR and SEM and utilized at 0.33mg/mL to determine the tetracycline content in phosphate buffers (pH 7.4, 50mM) through the Perrin and Stern-Volmer models of quenching fluorometry. The Perrin model was applied to tetracycline concentrations of 7.4μM-0.37mM for MIP-MPS-QD, 7.4μM-0.12mM for MIP-APS-QD, and 7.4μM-0.10mM for MIP-MAA-QD (R2=0.9988, 0.9978, and 0.9931, respectively). The Stern-Volmer model was applied to tetracycline concentrations of 0.12-0.37mM for MIP-APS-QD (R2=0.9983) and 0.10-0.37mM for MIP-MAA-QD (R2=0.9970). The detection limits were 0.45μM, 0.54μM, and 0.50μM for MIP-MPS-QD, MIP-APS-QD, and MIP-MAA-QD, respectively. Equilibrium times, differences between imprinted and nonimprinted polymers, and MIP-QD quenching mechanisms were discussed. Finally, specificity studies demonstrated that MIP-MAA-QD exhibited optimal recoveries of 96% from bovine serum albumin (n=5, RSD=3.6%) and 91% from fetal bovine serum (n=5, RSD=4.8%).7enComparative syntheses of tetracycline-imprinted polymeric silicate and acrylate on CdTe quantum dots as fluorescent sensorsjournal article