CHI-YUAN LU2026-10-162026-10-162002-04-01Pure ID: 15360240Pure UUID: dd260524-c9fd-49c4-a57b-55d2fab6e7de10.1080/10473289.2002.10470790https://www.scopus.com/pages/publications/0036226741https://scholars.csmu.edu.tw/handle/123456789/24119Catalyst sorbents based on alumina-supported CuO, CeO2, and CuO-CeO2 were applied to a dry scrubber to clean up the SO2/HCl/NO simultaneously from pilot-scale fluidized-bed incineration flue gas. Inthe presence of organic compounds, CO and the infmicron particles SO2 and HCl removedby the fresh catalyst sorbents and NO reduced toN2 by NH3 under the catalysis of fresh and spent desulfurization/dechloridization (DeSO2/DeHCl) catalyst sorbents (copper compounds, Cu, CuO, and CuSO4) were evaluated in this paper. The fresh andspent catalyst sorbents were characterized by the Brunner-Emmett-Teller method (BET), X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), inductively coupled plasma-mass spectrometry (ICP-MS), and the elemental analyzer (EA). The study showed that the performances of CuO, CeO2, and CuO-CeO2/γ-Al2O3 were better than that of Ca(OH)2. The removal efficiency of SO2 and HCl was 80-95% in the dry scrubber system. Under NH3/NO = 1, NO could not be reduced to N2 becauseit was difficult to control the ratio of air/fuel in the flue gas. For estimating the feasibility of regenerating the spent catalyst sorbents, BET and EA analyses were used. They indicated that the pore structures were nearly maintained and a small amount of carbon accumulated on their surface.10enThe utilization of catalyst sorbent in scrubbing acid gases from incineration flue gasjournal article