CHI-YUAN LU2026-10-162026-10-162009-05-15Pure ID: 15217781Pure UUID: 7b3a7da0-c7f0-407b-bc9e-08a7c7a9c5c610.1016/j.desal.2008.01.048https://www.scopus.com/pages/publications/62249223528https://scholars.csmu.edu.tw/handle/123456789/23216A new class of multi-wall carbon nanotubes (MWCNTs)/carbon nanocomposite thin films was successfully prepared by incorporating (MWCNTs) into polyimide (PI) precursor solution. The carbon films were obtained in only one coating step by spin-coating technique on a macroporous alumina substrate and were pyrolyzed at 773 K. The structure and single gas permeation properties of PI-based carbon membranes incorporated with or without MWCNTs were investigated. From the FE-SEM images, the pure carbon membranes have a thin dense permselective layer with few closed pores while the permselective layer of the MWCNTs/carbon nanocomposite thin films are porous due to the structure of nanotubes. The MWCNTs/carbon nanocomposite thin films exhibited that the ideal carbon dioxide flux was 866.6 Barrer (1 Barrer = 1×10-10 cm3 (STP) cm cm-2 s-1 cm Hg-1) and the separation factor of CO2/N2 was 4.1 at room temperature and 1 atm, which was 2-4 times of magnitude higher than that of pure carbon membrane prepared by the same procedures and conditions.6enPreparation and characterization of carbon molecular sieve membranes for gas separation-the effect of incorporated multi-wall carbon nanotubesjournal article