王櫻芳Ying-Fang Wang郭芸均Yun-Jun Kuo職業安全衛生學系2026-10-052022-08-292022https://handle.ncl.edu.tw/11296/szpzm2https://scholars.csmu.edu.tw/handle/123456789/20528半揮發性有機物 (SVOC),現有的採樣方法為濾材後端接吸附管進行危害物之捕集。唯濾材的部分可能會使氣相SVOC濃度被低估,因此本研究以IOM配合XAD-2 之組合分別採集氣、固相陶斯松及21種多環芳香烴化合物作為參考值,以評估現行OSHA多功能採樣管(OVS管)及IFV Pro採樣器應用於實場之捕集效率,並建立適當之校正模式。 本研究選取噴灑陶斯松作業之果農及鑄造廠作業之勞工,分別進行氣固相陶斯松及多環芳香烴化合物之個人採樣。採樣結果,係通過主成份分析確認其主要影響因子,並對其進行校正。利用採樣濃度、校正濃度與背景濃度之間的百分比變化,以確認校正之有效性。 研究結果顯示,OVS管之平均捕集效率為67% (範圍 : 20% ~ 90%),校正前採樣濃度與背景濃度之百分比範圍與標準偏差分別為0.172% ~ 10.23%與1.29。IFV Pro採樣器之平均捕集效率為130% (範圍 : 72% ~ 163%),校正前採樣濃度與背景濃度之百分比範圍與標準偏差分別為0.51% ~ 0.66%與0.016。 使用主成份分析法輔以旋轉角進行校正,即能初步有效校正採樣濃度。本研究在經過校正後之離散程度皆有在5%以內,其中OVS之離散程度由0.63變為0.33,而IFV Pro之離散程度則由0.056變為0.04。 本研究進一步使用主成份分析法輔以IOM+XAD-2進行校正, OVS管校正後標準偏差減少至0.43,而IFV Pro校正後標準偏差為0.016。可發現,使用主成份分析法能更有效校正濃度,最明顯之變化在於OVS管。 本研究發現,IFV Pro採樣器之設計,可有效採集氣固相半揮發性有機化合物。而OVS管的採集效率可能受到其他因素之干擾,使用主成份分析輔以旋轉角進行校正,能有效改善採樣濃度,使其貼近現場濃度。如要更精準確認實場濃度,建議在使用OVS管時,輔以IOM+XAD-2進行採樣,並以主成份分析進行適當之校正,以便準確評估環境中之有害物濃度。The existing sampling method is to connect the adsorption tube at the end of the filter material to capture the hazardous substances for semi-volatile organic compounds (SVOC). The part of the filter may cause the gas phase SVOC concentration to be underestimated. The study aimed to the combination of IOM and XAD-2 was used to collect gas and solid phase. Chlorpyrifos and polycyclic aromatic hydrocarbons (PAHs) as reference values ​​to evaluate the capture efficiency of the current multi-functional sampling tube (OVS tube) and the IFV Pro sampler and establish an appropriate calibration model. In this study, we selected fruit farmers who sprayed Chlorpyrifos and workers in a foundry to implement personal sampling of gas - solid phase Chlorpyrifos and PAHs, respectively. The results were confirmed by principal component analysis and their main influencing factors were corrected. Further, the percent change between the sampled concentration, the corrected concentration, and the background concentration was conducted to confirm the validity of the calibration. The research results show that the average capture efficiency of the OVS tube is 67% (range: 20%~90%), and the percentage range and standard deviation of the sampling concentration and background concentration before calibration are 0.172% ~ 10.23% and 1.29, respectively. The average capture efficiency of the IFV Pro sampler was 130% (range: 72%~163%), and the percentage range and standard deviation of the sampling concentration and background concentration before calibration were 0.51% ~ 0.66% and 0.016, respectively. Using the principal component analysis method supplemented by the rotation angle for correction can effectively improve the sampling concentration. The dispersion degree after correction is all within 5%, the dispersion degree of OVS is changed from 0.63 to 0.33, and the dispersion degree of IFV Pro is changed from 0.056 to 0.04. This study further used principal component analysis supplemented by IOM+XAD-2 for calibration, the standard deviation after OVS tube calibration was reduced to 0.43, and the standard deviation after IFV Pro calibration was 0.016. It can be found that the concentration can be more effectively corrected by using the host analysis method, and the most obvious change is in the OVS tube. This study found that the design of the IFV Pro sampler can effectively collect gas-solid phase semi-volatile organic compounds. The acquisition efficiency of OVS tube may be interfered by other factors. Using principal component analysis supplemented by rotation angle for correction can effectively improve the sampling concentration and make it close to the on-site concentration. To more accurately confirm the field concentration, it is recommended to use IOM+XAD-2 for sampling when using the OVS tube, and perform proper calibration with principal component analysis, so as to accurately evaluate the concentration of harmful substances in the environment.半揮發性有機化合物OSHA多功能採樣管IFV Pro採樣器主成份分析Semi-volatile organic compoundsOVS tubeIFV Pro samplerPrincipal Component Analysis評估現行半揮發性有機化合物採樣方法之捕集效率thesis